Quote & Cut vs Paperless Parts
Paperless Parts is an enterprise estimating platform for machine shops and fabricators. Buyers send an RFQ through a form, your estimators build the quote inside the platform, and the customer receives a digital quote with online checkout. Quote & Cut removes the wait. It is a WordPress and WooCommerce plugin that gives the customer a price the moment their DXF or STEP file lands, nests the parts on your real sheets with its own engine, and takes payment in your own checkout, with nobody on your team needing to open the job first. Below is how the two compare on speed to a price, cost and the buying experience.
Looking for a Paperless Parts alternative?
Paperless Parts is a serious estimating system, and for a multi-process job shop quoting complex machined assemblies it is a sensible choice. But every quote still passes through a person: the RFQ arrives, an estimator builds it, the buyer waits. Quote & Cut takes the estimator out of standard laser work altogether. The customer uploads, the price is calculated from your rates and a real nest, and they pay in your WooCommerce checkout, usually before an RFQ would have been read. Four questions tend to settle which approach suits your shop.
With Quote & Cut the answer is seconds. The file is cleaned, checked, nested on your sheet sizes and priced from your cutting speeds and machine rates while the customer watches. Paperless Parts advertises quoting a single component in about 15 minutes, which is quick for an estimator, but the buyer only gets the figure once someone has picked the RFQ up, built the quote and sent it.
In Paperless Parts, an estimator does: the Smart RFQ form collects the files, your team is emailed, and a person prepares and sends the digital quote. Quote & Cut hands that work to the customer and the software. They choose material, thickness, quantity and, on Advanced and Enterprise, folds, powder coating, hole operations and lead time, and the order arrives in WooCommerce with the nested DXF and production files already attached.
Quote & Cut is a plugin. Install it, enter your API key, and the guided setup wizard with its material catalogue walks you through materials, sheet sizes, speeds and rates, so a shop can be quoting on its own site the same afternoon. Paperless Parts describes a typical implementation of 10 to 12 weeks with a dedicated implementation team.
Quote & Cut’s Starter plan is free, not a trial: 25 nesting jobs and quotes a month with DXF uploads, true-shape nesting and WooCommerce ordering, for as long as you want it. Paperless Parts does not publish prices or offer a free trial. Pricing is scoped to your shop size, modules, integrations and contract length, with multi-year commitments typically priced more favourably.
Paperless Parts vs Quote & Cut
Each row compares how the two platforms handle the same job, from where the customer quotes to how long setup takes. Green is included, amber is included with limits, on a higher plan or through another product, and red is not offered.
Paperless Parts features were checked on 29 October 2026 from paperlessparts.com, including its pricing request, facts, buyer experience, integrations, sheet metal and quote workflow pages, plus G2 and Capterra, and may have changed since. Paperless Parts does not publish prices. Looking at other platforms too? See every Quote & Cut comparison in one place.
What Sets Quote & Cut Apart
Paperless Parts gives an estimator better tools to build a quote. Quote & Cut is built so that, for laser cutting, no estimator is needed: the customer uploads, the software nests and prices, and WooCommerce takes the payment, all on your own site and all in the time it takes to read this paragraph.
The customer drags a file onto your quote page and sees the part in 3D, its dimensions and whether the file is clean before the price appears. Every upload is shown in 3D, including a plain 2D DXF. There is no RFQ to triage and no inbox to check: the figure is on screen in seconds.
Instant does not mean approximate. Quote & Cut's own true-shape engine rotates and interlocks the actual part outlines on your real sheet sizes before it prices, so material is measured, not estimated. The nested layout DXF goes onto the order, so what the customer paid for is what the machine cuts.
Enter materials, thicknesses, sheet sizes, cutting speeds, machine rates, gas, handling and markups once in the setup wizard, which comes with a material catalogue and sensible defaults for your machine. From then on every price follows the same rules, so the automated quote is as consistent as your best estimator and far quicker.
On Advanced and Enterprise the customer adds folds with a folding drawing, picks a powder-coat colour and finish from your full range, and specifies tapped, countersunk or counterbored holes or a hole resize for each part. The live 3D view updates with every choice, so the detail an estimator would normally chase by email is captured correctly before checkout.
Each paid quote is a WooCommerce order, so anything WooCommerce connects to connects to Quote & Cut: Xero, QuickBooks Online, Zapier, Google Drive and thousands more. Nothing needs a scoped integration project. Enterprise adds sheet inventory and market index pricing so the automated price keeps pace with your stock and your steel costs.
Form, price, cart and payment are all pages on your own WordPress site, using the gateways, delivery rates, tax rules and customer accounts you have already set up. The customer never leaves for a quote portal, which keeps the trust you built on your site intact and turns more visits into paid orders.
A Fair Look
Quote & Cut is for laser cutting shops that want customers pricing and paying on their own website without waiting for an estimator. Paperless Parts is for estimating teams quoting complex, multi-process work, and some shops genuinely need that.
If what you want is a laser cutting customer who uploads a file, sees a price and pays on your own site before anyone in the office has looked at it, keep reading. That is the job Quote & Cut does.



Why Shops Switch
The shops that choose Quote & Cut over Paperless Parts tend to say the same things: the estimator was the bottleneck on routine laser work, customers were going elsewhere while they waited for a quote, and the shop wanted a price it could see and a system it could switch on today, not a scoped contract and a twelve-week implementation.
Pricing
One side of this comparison has a price list and the other has a request form. Quote & Cut’s plans are published and you can start on the free one now; Paperless Parts scopes a custom contract to your shop before you learn the figure.
Three published plans, each priced per website in pounds, with 20% off when billed yearly. No setup fee, nothing taken from orders, and you can cancel whenever you like.
Pricing on request. Paperless Parts’ pricing page is a request form, and its own facts page says there is no blanket price; each quote is custom-scoped.
Final Verdict
Both tools price a part from its CAD file. The difference is who is waiting on whom: with Paperless Parts the buyer waits for an estimator and the shop waits for an implementation; with Quote & Cut the buyer has a price in seconds and the shop is live in an afternoon.
For a laser cutting shop, the question is whether a person needs to sit between the customer and the price. Paperless Parts assumes yes and gives that person excellent tools. Quote & Cut assumes no for standard laser work, and lets the customer price, nest and pay on your website while the Paperless Parts RFQ would still be sitting in an inbox.
Try It Free
Install Quote & Cut on your WordPress site, run the setup wizard with your materials and rates, place the quote form on a page, and your first customer can price and pay today on the free Starter plan. No contract, no implementation team, no fee on orders.
FAQ's
Paperless Parts is an estimating and quoting platform for machine shops and fabricators. Buyers submit an RFQ, your estimators build the quote inside the platform from geometry analysis and pricing formulas, and the buyer receives a digital quote with online checkout. Quote & Cut is a WordPress and WooCommerce plugin that does the pricing automatically: a laser cutting customer uploads a DXF or STEP file on your site, the parts are nested with Quote & Cut's own engine, the price appears in seconds and they pay in your WooCommerce checkout. No estimator is needed and the customer never leaves your domain.
Paperless Parts does not publish prices. Its pricing page is a request form, and its facts page says pricing is custom-scoped to shop size, modules, integrations and contract length across Growth, Professional and Enterprise tiers, with no free trial. Quote & Cut lists its prices: Starter is free, Advanced is £249 a month and Enterprise is £799 a month, each per website with unlimited admin users, 20% off yearly and nothing charged on orders. Figures were checked on 29 October 2026.
No. The Smart RFQ form collects the buyer's files and notifies your team, and an estimator then prepares and sends the quote. Paperless Parts says this takes around 15 minutes for a single component. Quote & Cut prices without a person: the upload is cleaned, nested on your sheet sizes and costed from your rates while the customer is on the page, and they can add it to the cart and pay immediately.
For laser cutting, yes, and it is quicker for the buyer. Instant ordering is what Quote & Cut is for: the form sits on your own pages, the figure comes from true-shape nesting and your pricing rules, and the job drops into your WooCommerce cart with your gateways, delivery rates and customer accounts. If you also quote CNC machining or additive, Paperless Parts covers processes Quote & Cut does not.
Yes, for estimating. Paperless Parts has built-in nesting that estimators use to work out material cost for a quote, including multi-component and manual nesting, so no separate nesting software is needed for costing. A nested DXF for the machine is not listed. In Quote & Cut the nest runs by itself as part of the instant price, on every plan including free Starter, and the nested layout DXF is saved to the WooCommerce order for production.
Paperless Parts describes a typical implementation of 10 to 12 weeks with a dedicated implementation team, adjusted to the customer's needs. Quote & Cut is a plugin for any WordPress site running WooCommerce: install it, add the API key, work through the guided wizard with its material catalogue, and most shops are taking priced orders the same afternoon.
Yes, and you do not have to switch all at once. Because the Starter plan is free, you can install Quote & Cut on your WordPress site, set up your materials, sheet sizes, speeds, rates and markups in the wizard, put the quote form on a page and let real laser cutting customers price jobs instantly while your estimators keep using Paperless Parts for everything else. Compare the prices on live jobs, then decide.
Paperless Parts and Quote & Cut both price parts from the customer’s CAD files, but they put the work in different hands. Paperless Parts keeps an estimator at the centre: an RFQ comes in, a person builds the quote, the buyer checks out on a Paperless Parts quote page, and all of it follows a scoped contract and a 10 to 12 week implementation. Quote & Cut puts the customer at the centre: a price in seconds on your own WooCommerce site, a true nest on every plan, folds, finishes and hole operations chosen on a live 3D view, a free plan you can switch on this afternoon and no fee on orders. If Paperless Parts is on your shortlist for a laser cutting business, book a demo and we will price one of your own DXF files with you, or set the Quote & Cut plans against each other.
Discount Applied Successfully!
Your savings have been added to the cart.